Table of Contents
Advertisement
Extensible Firmware Interface Specification
StationIp
SubnetMask
DhcpDiscover
DhcpAck
ProxyOffer
PxeDiscover
PxeReply
PxeBisReply
IpFilter
ArpCacheEntries
ArpCache
240
The device's current IP address. This field is initialized to a zero
address by Start(). This field is set when the
Dhcp()function completes successfully. This field can also be
set by the
SetStationIp()
The device's current subnet mask. This field is initialized to a
zero address by the
Start()
the Dhcp()function completes successfully. This field can also
be set by the
SetStationIp()
Cached DHCP Discover packet. This field is zero-filled by the
function, and is set when the
Start()
completes successfully. The contents of this field can replaced
by the
function.
SetPackets()
Cached DHCP Ack packet. This field is zero-filled by the
function, and is set when the
Start()
completes successfully. The contents of this field can be
replaced by the
SetPackets()
Cached Proxy Offer packet. This field is zero-filled by the
function, and is set when the
Start()
completes successfully. The contents of this field can be
replaced by the
SetPackets()
Cached PXE Discover packet. This field is zero-filled by the
function, and is set when the
Start()
completes successfully. The contents of this field can be
replaced by the
SetPackets()
Cached PXE Reply packet. This field is zero-filled by the
function, and is set when the
Start()
completes successfully. The contents of this field can be replaced
by the
function.
SetPackets()
Cached PXE BIS Reply packet. This field is zero-filled by the
function, and is set when the
Start()
completes successfully. This field can be replaced by the
function.
SetPackets()
The current IP receive filter settings. The receive filter is
disabled and the number of IP receive filters is set to zero by the
function, and is set by the
Start()
function.
The number of valid entries in the ARP cache. This field is reset
to zero by the
function.
Start()
Array of cached ARP entries.
12/12/00
function.
function. This field is set when
function.
function
Dhcp()
function
Dhcp()
function.
function
Dhcp()
function.
function
Discover()
function.
function
Discover()
function
Discover()
SetIpFilter()
Version 1.02
Advertisement
Table of Contents
