Advertisement
Remote Control Operation (continued)
Press the standby button
effect.
Press the "750W" button once for low heat setting. Press the button again to switch off the heat.
Press the "1500W" button once for high heat setting. Press the button again to switch off the
heat.
Press the "DIMMER" button to change the flame color. Every time you push the button, the
colors will change in the following order:
o Amber
o Red
o Green
o Blue
o Red and Green
o Red and Blue
o Green and Blue
o Red and Amber
o Green and Amber
o Blue and Amber
Auto Safety Shut-Off Mechanism
This fireplace is equipped with a safety shut-off feature which initiates if the fireplace overheats
(e.g. Due to blocked air vents). For safety reasons, the fireplace will NOT automatically reset,
and will need to be manually turned ON.
To restart the fireplace, unplug the fireplace from the power outlet for at least 15 minutes. Next,
reconnect to the power outlet and turn on the fireplace.
Troubleshooting
Unit does not work / does not heat
No flame effect
on the remote control once to turn on the fireplace with flame
Problem
Possible Solution
· Check if the unit is plugged in the power outlet.
· Check if the unit is in Standby mode. If so, turn
the unit ON.
· Check if the heat is turned OFF.
·
Check for safety cut-off operation.
· Check if the unit is plugged in the power outlet.
· Check if the unit is in Standby mode. Turn the
unit ON.
11
Advertisement
