Download Print this page

Frigidaire Vienna VWF-1 0305 Instructions & Operating Manual page 3

2 in 1 (wall mount & floor standing) color changing led fireplace
Hide thumbs


23. Faulty wall outlet connections may cause the wall outlet to overheat. Be sure that the fireplace plug
properly fits into the outlet before each use. During use, make sure the fireplace plug does not
overheat. If necessary, have a qualified electrician check and / or replace the wall outlet.
24. Do not place the fireplace near a bed for objects such as pillows or blankets can fall off the bed and
be ignited by the fireplace.
25. Never clean this fireplace while it is plugged in. To disconnect, turn control to OFF, then remove the
plug from the outlet. Never pull the cord. Always hold the plug firmly and then remove from the
26. This fireplace is intended for supplemental heat and / or decorative purposes. Continuous use for
several hours can impact the performance and life of the fireplace.
27. It is not intended to be used in commercial, industrial or agricultural settings.
28. Do not use outdoors.
29. Do not shorten or change the shape of the bracket.
Getting Started
Remove the fireplace from the box.
Remove the packaging. Place it inside the box or safely dispose elsewhere.
Package Contents
Electric Fireplace
Floor Standing Base
Wall Mount Bracket
Screws and Screw Anchors
Pebble Pack
Remote Control (Requires 2 x AAA Batteries – Not Included)
Instruction Manual
Curved, tempered heat resistant glass panel
Optional wall mountable and / or floor standing
Dual heat settings (750Watts / 1500Watts)
Color changing LED flames with realistic effect
10 flame colors to choose from
Auto color changing mode built-in
Flames operate with & without heat
Adjustable flame brightness
1500 Watts
Built-in overheating protection, auto safety shut-off



  Related Manuals for Frigidaire Vienna VWF-1 0305

This manual is also suitable for:

Vienna vwf-1/0305