Advertisement
Quick Links
IMPORTANT INSTRUCTIONS & OPERATING MANUAL
Ottawa
Retro style floor standing electric fireplace
Item No: FORF-1/0340
Read these instructions carefully before attempting to assemble, install, operate or maintain
the product. Protect yourself and others by observing all safety information. Failure to comply
with instructions could result in personal injury and / or property damage. Retain instructions
for future reference.
Advertisement
Related Manuals for Frigidaire Ottawa FORF-1/0340
Summary of Contents for Frigidaire Ottawa FORF-1/0340
- Page 1 IMPORTANT INSTRUCTIONS & OPERATING MANUAL Ottawa Retro style floor standing electric fireplace Item No: FORF-1/0340 Read these instructions carefully before attempting to assemble, install, operate or maintain the product. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and / or property damage.
-
Page 2: General Safety Information
GENERAL SAFETY INFORMATION When using this fireplace, basic precautions should always be taken to reduce the risk of fire, electric shock and injury to persons, including the following: CAUTION – Due to the high temperature, keep electrical cords, drapery and other furnishings at least 3 feet from the front, side and rear of the fireplace. - Page 3 properly fits into the outlet before each use. During use, make sure the fireplace plug does not overheat. If necessary, have a qualified electrician check and / or replace the wall outlet. 24. Do not place the fireplace near a bed for objects such as pillows or blankets can fall off the bed and be ignited by the fireplace.
- Page 4 Helpful Advice Before Installation • Please retain all packaging until you have checked and counted all the parts and other package contents. • It is recommended to place your fireplace near an existing outlet, for ease of electric connection. • Store your fireplace in a dry, safe and dust-free place while drilling, for fireplace installation.
-
Page 5: Troubleshooting
• In order to activate the heat, it is necessary to turn on the fan. The fireplace will not emit heat without the fan switch turned on. • Adjust the Flame Brightness Control knob for the desired flame effect. • Adjust the Thermostat Control knob to regulate the heat. - Page 7 Cleaning & Maintenance • Disconnect from the power supply before attempting any maintenance or cleaning in order to reduce the risk of fire, electric shock to persons or damage to property. • Warning - Always disconnect from the power supply before cleaning fireplace. •...
- Page 8 Trademark Notice: FRIGIDAIRE is a registered trademark used under license from Electrolux Home Products, Inc.