Retro style floor standing electric fireplace (8 pages)
Summary of Contents for Frigidaire Venice WLVF-1/0343
IMPORTANT INSTRUCTIONS & OPERATING MANUAL Venice Wall Hanging Fireplace with LED Flame Technology & Digital Display Item No: WLVF-1/0343 Read these instructions carefully before attempting to assemble, install, operate or maintain the product. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and / or property damage.
GENERAL SAFETY INFORMATION When using this fireplace, basic precautions should always be taken to reduce the risk of fire, electric shock and injury to persons, including the following: CAUTION – Due to the high temperature, keep electrical cords, drapery and other furnishings at least 3 feet from the front, side and rear of the fireplace.
23. Faulty wall outlet connections may cause the wall outlet to overheat. Be sure that the fireplace plug properly fits into the outlet before each use. During use, make sure the fireplace plug does not overheat. If necessary, have a qualified electrician check and / or replace the wall outlet. 24.
Quick Reference Guide • Prior to installation, please ensure that the voltage and capacity of your power outlet is compatible with your fireplace. • Your fireplace may emit a slight, harmless odor during its first use. This odor is a normal reaction caused by the initial heating of internal fireplace parts and it will not occur again.
Helpful Advice Before Installation • Please retain all packaging until you have checked and counted all the parts and other package contents. • The package contains small apparatus which should be kept away from young children and infants. • We suggest that you move all the smaller parts into a container to reduce the risk of losing them. •...
35.4 inch 5.9 inch 2 feet Step One • Keep the top of the fireplace at least 3 feet away from the ceiling or other objects for optimum heat ventilation. • Remove the front frame from the fireplace and place it away safely so that it does not become damaged.
• Make sure the area to be drilled does not have any hidden electrical wires or water and gas pipes. • The screws provided is for concrete walls only; please use suitable fixings for your wall type. If in doubt, contact a qualified hardware expert. •...
• Place the front frame over the front of the fireplace aligning the slots in the bracket at each side of the glass panel with the knobs on the sides of the fire (see figure below). Two people will be required for this operation.
Press the “FLAME” button to adjust flame brightness. • Auto Safety Shut-Off Mechanism • This fireplace is equipped with a safety shut-off feature which initiates if the fireplace overheats (e.g. Due to blocked air vents). For safety reasons, the fireplace will NOT automatically reset, and will need to be manually turned ON.
Trademark Notice: FRIGIDAIRE is a registered trademark used under license from Electrolux Home Products, Inc.