Restoring The Current Configuration By Using Http - Cisco Small Business AP541N Administration Manual

6
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
116
Click the Restore button.
The access point reboots. A reboot confirmation dialog and follow-on rebooting
status message displays. Please wait for the reboot process to complete, which
might take several minutes.
The Configuration Utility is not accessible until the access point has rebooted.

Restoring the Current Configuration by Using HTTP

Use the following steps to save a copy of the current settings on an access point
to a backup configuration file by using HTTP:
Clear the Use TFTP to upload the file option.
When you clear the radio button, the Server IP field is disabled.
Enter the name of the file to restore.
Click Restore.
A File Upload or Choose File dialog box displays.
Navigate to the directory that contains the file, then select the file to upload and
click Open.
Only those files saved as .xml backup configuration files are valid to use with
NOTE
Restore; for example, ap_config.xml.
Click Restore.
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
Administration
Access Point Configuration