Sequence Of Operations - Electrolux Diva Service Manual

4.5 Sequence of operations

1. Press S0 to switch the appliance on.
All the LEDs corresponding to the programme/
option buttons light.
2. Press the button corresponding to the desired
programme.
The corresponding LED remains lit and the
relative cycle phase LED starts flashing.
3. If desired, select the delayed-start function or
other options (if featured).
4. The settings entered can be modified before
closing the door.
5. During the execution of the cycle, the relative
LED remains lit and the LED of the current
phase flashes.
6. To interrupt the current programme:
Open the door and, if necessary, press S0 to
switch off the appliance.
To re-start the appliance, press S0 again and
re-close the door.
7. To cancel the current programme:
Press S2 – S3 buttons at the same time for
about 2 seconds.
The salt and rinse-aid LEDS light.
Press the desired programme button again.
8. At the end of the programme:
The END OF CYCLE LD11 LED lights; to
switch off the LED, open and re-close the door.
9. Press S0 to switch the appliance off.
SOI/TD PR 11 /35 599 35 90-23