4.7 Sequence of operations
1. Close the door.
2. Press S0 to switch the appliance on.
The pilot lamp L0 lights.
3. Select the desired programme.
The display shows the time-to-end or the
programme no. flashing.
The phase LEDs light.
4. Within 3 seconds select the possible
delayed start or the desired option (if
featured)
5. Automatically, 3 seconds after the last
pressure of a button, the cycle starts.
The digits and the current phase LED
light steady.
6. The time-to-end decreases every minute
and is updated after every cycle phase.
The LED indicates the current phase.
7. To interrupt a current programme:
Switch the appliance off with S0 (or open
the door)
To start it again, press S0 (and close the
door)
8. To cancel a current programme:
Press S2 – S3 simultaneously for about 2
seconds.
9. At the end of the programme:
The buzzer sounds at intervals.
The END OF CYCLE LED lights.
The display shows [0].
10. Press S0 to switch the appliance off.
SOI/DT 2003 - 01 eb
12
599 35 63-72