Sequence Of Operations - Electrolux DIVA 60 cm Service Manual

4.9 Sequence of operations

1. Open the door to access the controls.
2. Press S0 to switch the appliance on.
3. Select the desired programme.
The display shows the time-to-end or the
programme no. flashing.
4. Select the possible delayed start or the
desired option (if featured)
5. Close the door to start the cycle.
The digits light steady.
6. The time-to-end decreases every minute
and is updated after every cycle phase (not
visible from the user).
7. To interrupt a current programme:
Switch the appliance off with S0 (or open
the door)
To start it again, press S0 (and close the
door)
8. To cancel a current programme:
Press S2 – S3 simultaneously for about 2
seconds.
9. At the end of the programme:
The buzzer sounds at intervals.
The END OF CYCLE LED lights.
The display shows [0].
10. Press S0 to switch the appliance off.
SOI/DT 2003 - 01 eb 12 599 35 64-85