Control Panel; On / Off Button (S0); Programme/Option Buttons (S1÷S6); Programme Indicator Led - Electrolux Diva Service Manual

4.1 CONTROL PANEL

4.1.1 Control panel
The configuration of the control panel depends on the following:
Number of programme selection buttons (from a minimum of 3 to a maximum of 6)
Number of LEDs or presence of the one-digit display
ON/OFF button
[S0] -
[S1] ... [S3] - PROGRAMME SELECTION buttons
[S4] ... [S6] – PROGRAMME SELECTION and/or OPTIONS buttons
[LD1] ... [LD3] - "PROGRAMMES" INDICATORS Leds
[LD4] [LD5] [LD12] - "PROGRAMMES and/or OPTIONS" INDICATORS Leds
[LD6] ... [LD8] - "DELAYED START TIME" INDICATORS Leds
[LD9] ... [LD11] - "CYCLE PHASES" INDICATORS Leds ([LD7]
[LD13] [LD14] - "SALT / RINSE-AID" INDICATORS Leds
4.1.2

ON / OFF button (S0)

The ON/OFF button is featured on all models in the range, and is used to switch the appliance on
and off. Switching off does not cancel the programme being executed.
4.1.3 Programme/Option buttons (S1÷S6)
These buttons are used to select the washing programme:
Press one of the buttons to select a washing programme
Within 3 seconds after selecting the programme, the user can enter the desired option(s) or select the
delayed-start function (if featured)
A specific LED is associated with each button
The dishwashers may have from a minimum of 3 to a maximum of 6 buttons
The following options may be featured:
- Delayed-start (3/6/9 hours in the versions without display and from 1 to 9 hours in the versions with
display)
- Half-load
- 3 in 1 tablet
- Extra rinse
- Sanitize
Buttons S1, S2, S3 are featured on all models; these are also used for certain Servicing functions
The functions of the various buttons depend exclusively on the software configuration of each
appliance. For more detailed information, refer to the table of programmes relative to the specific
model.
4.1.4

Programme indicator LED

1. When the appliance is switched on with S0 button (fig.1) the pre-selection phase is indicated
2. Pushing a programme button, the corresponding Led remains lit and, while the other switch off, the Led
of the current phase flashes (fig.2).
SOI/TD PR
Fig.1
7/35
[LD9] in the version with 1 digit)
599 35 90-23
Fig.2