Table of Contents
Advertisement
Temperature
• The flash unit may be used over a temperature range of –20°C to
50°C.
• Do not leave the flash unit exposed extremely high temperatures
(eg. direct sunlight inside motor vehicles), or in conditions of high
humidity.
• The response of the data panel becomes slower as temperature
decreases, and it becomes darker at high temperatures. Restore it
to normal temperature if these problems occur.
• To prevent condensation from forming, place the flash in a sealed
plastic bag when bringing it from cold environment to a warm envi-
ronment. Allow it to come to room temperature before removing it
from the bag.
• Battery capacity decreases at colder temperatures. Keep your
camera and spare batteries in a warm inside pocket when shoot-
ing in cold weather.
power left in the batteries in cold weather. Batteries will regain
some of their capacity when warmed to normal operating tempera-
ture.
• This flash unit is not waterproof. Care is therefore required to
ensure that it does not come into contact with water or sand when
used near water. Contact with water, sand, dust, or salt content
may result in a malfunction.
Maintenance
• Clean by wiping with a soft, clean cloth. If the flash has been in
contact was sand, wiping will damage the surface, and it should
therefore be cleaned gently using a blower.
• Do not use cleaners containing organic solvents (eg. thinners or
benzene) under any circumstances.
may blink even when there is some
75
Hide quick links:
Advertisement
Table of Contents
