Konica Minolta MAXXUM FLASH 5600HS (D) Instruction Manual page 62

MULTIPLE FLASH (MULTI)
10. Set the shutter speed and aperture.
• The shutter speed is calculated as follows to suit the selected flash
frequency and number of flashes.
Number of flashes (TIME) ÷ Flash frequency (Hz) ≤ Shutter speed
For example, when ten flashes and 5Hz are selected, 10 ÷ 5 = 2
requires a shutter speed of longer than two seconds.
11. When the flash is fully charged, press the shutter-
release button to take the photo.
• The distance at which the proper exposure is obtained with a single
flash is displayed on the data panel.
62
7. Press the select button to blink
[LEVEL] on the data panel.
• The current power level is displayed.
8. Press the + or – button to
select the power level to be
set.
• The power level may be selected
from the following.
1/8, 1/16, 1/32
9. Press the select button.