Table of Contents
Advertisement
AUTO POWER ON/OFF AND FILM
Auto Power On
Power is supplied to this flash automatically (auto power on) in the
following situations.
• When the camera is used with the flash
attached.
• When the flash on/off button is pressed.
Auto Power Off
Power is switched off and data panel indicators disappear automati-
cally to save the batteries when the camera or flash is not used for
four minutes (auto power off).
• When the flash is switched off (right diagram),
the data panel indicator will disappear after
eight seconds, or after 60 minutes in the case
of wireless flash (p. 40).
• Custom settings may be used to change the
time of auto power off, or to disable auto power off (p. 65).
Film
Do not use high-speed film (rating in excess of ISO 1000) with TTL
direct metering (
such film increases the exposure error.
• The low-speed film limit is the same as that for the films specified for
the camera. See the camera manual for details.
displayed on the data panel, p. 36). Use of
Flash on/off button
15
Hide quick links:
Advertisement
Table of Contents
