Setting Power Level (Level) - Konica Minolta MAXXUM FLASH 5600HS (D) Instruction Manual

SETTING POWER LEVEL (LEVEL)

The power level for the flash can be adjusted.
58
1. Press the select button to dis-
play [LEVEL] on the data
panel.
• The current level is displayed.
• This step may be ignored when man-
ual flash
2. Press the + or – button to
select the power level to be
set.
• With TTL or manual flash photogra-
phy the power level may be selected
from the following.
1/1, 1/2, 1/4, 1/8, 1/16, 1/32
• With multiple flash photography the
power level may be selected from the
following.
1/8, 1/16, 1/32
3. Press the select button.
is selected.