Wireless/Remote Flash Mode - Konica Minolta MAXXUM FLASH 5600HS (D) Instruction Manual

WIRELESS/REMOTE FLASH MODE

Normal flash
Wireless flash
Wireless ratio flash
40
Photographs taken with the flash
attached to the camera are flat as
shown in photo
remove the flash from the camera and
position it to obtain a more three-
dimensional effect as shown in photo
.
Photo was taken using the cam-
era's built-in flash and the flash locat-
ed separately from the camera, with a
light intensity of 1:2 respectively to
produce a soft gradation between light
and dark, and natural shadows.
When taking this type of photograph
with a single lens reflex camera, the
camera and the flash unit are most
commonly connected by cable. This
flash eliminates the need for a cable
to transmit signals to the flash unit by
using the light of the flash itself as a
signal. This type of flash control is
referred to as 'wireless (remote)
flash'. The proper exposure is deter-
mined automatically by the camera.
. In such cases,