Konica Minolta MAXXUM FLASH 5600HS (D) Instruction Manual page 53

Taking Photos
Refer to the Wireless Remote Flash Controller manual.
• Set shutter speed to 1/60 of a second or less (low shutter speed).
Wireless high-speed sync photography cannot be used.
[3]-2 Ratio-Flash Control Using Two Or More Flash Units
When using wireless flash with two or more program flash units, it
is also possible to provide a flash intensity of 1 and 2 (or 2 and 1)
respectively.
• Ratio-flash control is not possible with 3600HS (D) and 3500xi only, as
ratio cannot be set with these flashes. Use with 5600HS (D), 5400HS,
or 5400xi.
• Ratio-flash control cannot be used with manual flash photography
.
Using 5600HS (D), 5400HS, 5400xi only
(The following applies for 5600HS (D). See flash or Wireless
Remote Flash Controller manual for other flashes.)
1. Set up the 5600HS (D) with the off-camera flash as
described in 1~4 on page 52~53.
3. Press the select button repeatedly to
blink [WL].
4. Press the + or – button to blink [WL
On].
5. Press the select button repeatedly
until blinking stops.
Continued on next page
53