Konica Minolta MAXXUM FLASH 5600HS (D) Instruction Manual page 7

This flash unit is designed and manufactured solely for use with
the Konica Minolta Maxxum/Dynax/Dimage series cameras. It
cannot be attached to other Konica Minolta cameras.
Performance when used with cameras from other manufacturers
cannot be guaranteed. Konica Minolta takes no responsibility for
accidents or malfunctions due to use with such cameras.
This manual contains information on products and accessories
available at the time of printing. To obtain compatibility information
on products not contained in this manual, contact a Konica
Minolta service facility.
This mark below the flashtube certifies that this product
meets the requirements of the EU (European Union) con-
cerning interference causing equipment regulations. CE
stands for conformité Européenne (European conformity).
7