Konica Minolta MAXXUM FLASH 5600HS (D) Instruction Manual page 49

• The 5400HS or 5400xi may be used as the controller. See the flash
unit manual if using the 5400HS. Display [W.L - C.1] if using the
5400xi.
Setting Up The Off-Camera Flash
(The following applies when the 5600HS (D) is used as the off-cam-
era flash.)
• The 5400HS, 5400xi, or 3500xi may be used as the off-camera flash.
See the flash manual if using the 5400HS. Display [W.L-F.1] if using
the 5400xi. Press and hold the on/off button until wireless indicator
glows if using the 3500xi.
5. Press the select button repeatedly
until blinking stops.
6. Attach the 5600HS (D) to the camera.
1. Switch the 5600HS (D) on.
2. Press the mode button to display
or
3. Press the select button repeatedly to
blink [WL].
4. Press the + or – button to blink [WL
On].
5. Press the select button repeatedly
until blinking stops.
.
Continued on next page
49