Connecting Camera And Flash By Cable - Konica Minolta MAXXUM FLASH 5600HS (D) Instruction Manual

CONNECTING CAMERA AND FLASH BY CABLE

Flash Units
Use the following flash units for off-camera flash photography by
cable.
A group: 5600HS (D), 5400HS, 5400xi, 5200i
B group: 3600HS (D), 3500xi, 2000xi, 3200i, 2000i
• In this mode, ADI metering and pre-flash metering will be canceled
and TTL flash metering will be used automatically.
• High-speed sync in P mode cannot be used when the flash is con-
nected with the Off-Camera Cable OC-1100.
The use of the optional off-camera
cables allows photography with the
flash units separated from the camera.
Up to four flash units can be connect-
ed. The ability to take photographs
without the need to consider position-
ing of the flash units provides for con-
siderable freedom to create a variety
of shadow effects on the subject.
• Flash units with accessory terminals
can be connected directly. When con-
necting the 5600HS (D), remove the
terminal cap and plug the cable into
the accessory terminal.
Continued on next page
55