Using The Built-In Flash - Konica Minolta MAXXUM FLASH 5600HS (D) Instruction Manual

WIRELESS/REMOTE FLASH MODE

[1]-1 Using The Built-In Flash

46
1. Attach the 5600HS (D) to the
camera and switch the flash
and camera power supplies on.
2. Set the camera to wireless
flash.
• The method used for the setting
varies with the camera. See the cam-
era manual for details.
• When the camera is set to wireless
the 5600HS (D) is also set to wire-
less automatically, and WL is dis-
played on the data panel.
3. Remove the 5600HS (D) from
the camera and raise the built-
in flash.
4. Set up the camera and the
5600HS (D).
• See page 43 for details.
5. Check that the built-in flash
and 5600HS (D) are fully
charged.
• is lit in the viewfinder when the
built-in flash is fully charged.
• The AF illuminator on the front blinks,
and on the rear is lit, when the
5600 HS (D) is fully charged.