Table of Contents
Advertisement
• High-speed sync is cleared when
described above, and a shutter speed faster than the sync speed can
no longer be set.
• It is recommended that photos be taken in bright locations. When pho-
tographing in dark areas the shutter speed will not exceed the sync
speed, even when
• The flash range with high-speed sync is less than for normal flash
photography. Check that the subject is within the displayed flash range
before taking the photo.
• High-speed sync cannot be used with multiple flash, ratio flash, or
bounce flash in the upwards, left, and right directions.
• When using a flash meter or color meter, high-speed sync cannot be
used because it interferes with the proper exposure. Either select
to clear it, or select a shutter speed less than the sync speed.
• With a DiMAGE digital camera, the flash will sync with all shutter
speeds regardless of the HSS setting.
3. Press the + or – button to
select
4. Press the select button repeat-
edly until blinking stops.
• [HSS] remains on the data panel.
is selected with the procedure
is selected.
.
39
Hide quick links:
Advertisement
Table of Contents
