Using Two Flash Units - Konica Minolta MAXXUM FLASH 5600HS (D) Instruction Manual

WIRELESS/REMOTE FLASH MODE

[2]-1 Using Two Flash Units

Setting Up The Controller
(The following applies when the 5600HS (D) is used as the con-
troller.)
48
• Use two 5600HS (D), 5400HS, or
5400xi, or one 5600HS (D), 5400HS,
or 5400xi, and one 3600HS (D) or
3500xi.
• Use Maxxum/Dynax 9, 7, 800si, 700si,
or 600si.
When two flash units are used, the
unit attached to the camera is used as
the controller, and the other as the off-
camera flash.
+ button
– button
Select button
Mode button
1. Switch the 5600HS (D) on.
2. Press the mode button to display
.
3. Press the select button repeatedly to
blink [WL].
4. Press the + or – button to blink [WL
CONTROL].