authentication
network-eap
authentication key-management wpa cckm
admit-traffic
If the autonomous access point is registered to a WDS (Wireless Domain Services) server, ensure both leap and eap types of
authentication are enabled in the WDS configuration.
wlccp authentication-server infrastructure method_Infrastructure
wlccp authentication-server client mac method_Clients
wlccp authentication-server client
wlccp authentication-server client
wlccp wds priority 255 interface BVI1
Controller Settings
Ensure that aggressive load balancing is disabled.
If using layer 3 mobility, then symmetric tunneling should be enabled and that the mobility group has been configured
containing each Cisco Unified Wireless LAN Controller's IP and MAC address.
Cisco Unified Wireless IP Phone 7925G Deployment Guide
eap_methods
eap
method_Clients
leap
method_Clients
47