Important Basic Settings; Changing The Base Code/Pin; Change Pin - Gigaset 2011 Operating Instructions Manual

giga2011.bk : kap09.fm5 Seite 39 Freitag, Juli 9, 1999 2:26 PM
9.7.99

Important basic settings

Changing the base code/PIN

Changing the base code
m t Service
Changing the handset PIN
m t Settings
kap09.fm5 Gig 2011 pocket, GBR PTT: A30852-X1101-B657-1-7619
In order to protect basic and individual settings, your Gi-
gaset 2011 pocket has two four-digit "key numbers", the
base code and the handset PIN (personal identification
number). The factory default for both numbers is "0000".
The base code must be known if you want to perform im-
portant basic settings or lock the handset for outgoing
calls. The base code is the main key to your Gigaset 2011
pocket.
The PIN is used to protect settings that mainly affect the
handset or the handsets, and have no influence on the
basic operation of the base station. For security reasons,
you should set a new base code and a new PIN.
The same base code applies to all handsets if more than
one is used (' page 76).
( t means: scroll with
Select the Service menu item.
#8:*
Start the setting procedure.
d
Enter the old base code (factory default: "0000").
d
Enter the new, four-digit base code and note carefully the
number entered.
d
Re-enter the new base code to confirm.
Save the setting.
SET
The PIN (personal identification number) for your handset
can have up to 8 digits. The factory default for the handset
PIN is "0000". Changing the PIN prevents unauthorised
persons from deleting entries from your directory, for ex-
ample.
( t means: scroll with
t Handset Settings. t Change PIN
Important basic settings
Z
, confirm with
)
OK
Z
, confirm with
)
OK
39