Step By Step Guide To Putting Into Service; Step 1: Observe The Safety Precautions; Step 2: Connect The Base Station - Gigaset 2011 Operating Instructions Manual

giga2011.bk : kap02.fm5 Seite 1 Freitag, Juli 9, 1999 2:26 PM
9.7.99

Step by step guide to putting into service

Step 1: Observe the safety precautions

Step 2: Connect the base station

Power cord for Mini-Western
TAE connection plug and
TAE telephone jack
Telephone cord
kap02.fm5 Gig 2011 pocket, GBR PTT: A30852-X1101-B657-1-7619
Step by step guide to putting into service
Please follow the step by step instructions for putting the
handset into service.
Please read the safety precautions as outlined in
these operating instructions before putting the
equipment into service.
Power supply unit and
220/230V socket
Power cord
plug
Telephone cord
Telephone cord
Mini-Western plug
Lay the cable in the cable channel provided for this
purpose. If you require the base station to operate in the
upright position, thread the cable backwards and out past
the first prong.
Insert the Mini-Western plug on your telephone cord into
the base station. The jack on the underside of the base
station is identified by the following symbol:
Insert the TAE plug on your telephone cord into the TAE
telephone socket.
Attachment
holes
Underside of base
station housing
1