Transferring Calls - Gigaset 2011 Operating Instructions Manual

giga2011.bk : kap08.fm5 Seite 24 Freitag, Juli 9, 1999 2:26 PM
9.7.99
Internal consultation calls and transferring calls

Transferring calls

When more than one handset is in operation
When a telephone system is in operation
24
kap08.fm5 Gig 2011 pocket, GBR PTT: A30852-X1101-B657-1-7619
If more than one handset is in operation it is possible to
transfer an external call to an internal party (' page 76).
Set up a connection.
INT
d Enter the number of the handset to which you want to
transfer the call (1 to 6). You will hear the internal ring
tone. The handset is called. The external call is put on
hold.
Either
Wait until the internal party answers and inform him/her
about the external call you are about to transfer.
e
Transfer the external call.
or
e Do not wait until the internal party answers. Transfer the
external call directly.
Instead of pressing
your handset in the charging unit.
If you have transferred the external call directly
and the internal party does not accept the call
within 30 seconds, an automatic recall is carried
out.
If you have transferred the external call directly
and the internal party is busy, an automatic re-
call is carried out immediately.
If you accept the recall, you will be reconnected
to the external party. A recall is accepted in the
same way as all other calls (' page 10).
If a telephone system is in operation, you can transfer an
external call to an internal party. Please check the opera-
ting instructions for the telephone system.
r Set up a consultation call. You will hear the dial tone. The
external call is put on hold.
d
Enter the desired extension number. The party in questi-
on is called. Wait until the party answers and inform him/
her about the external call you are about to transfer.
e
Transfer the external call.
e
, you can also replace