Table of Contents
Advertisement
18.7.99
Important basic settings
Changing the base code/PIN
Changing the base code
. t Service
kap09.fm5
In order to protect basic and individual settings, your Gi-
gaset 2011 has two four-digit "key numbers", the base
code and the handset PIN (personal identification
number). The factory default for both numbers is "0000".
The base code must be known if you want to perform im-
portant basic settings or lock the handset for outgoing
calls. The base code is the main key to your Gigaset 2011.
The PIN is used to protect settings that mainly affect the
handset or the handsets, and have no influence on the
basic operation of the base station. For security reasons,
you should set a new base code and a new PIN.
The same base code applies to all handsets if more than
one is used (
( t means: scroll with
Select the Service menu item.
#8:
Start the setting procedure.
Enter the old base code (factory default: "0000").
o
Enter the new, four-digit base code and note carefully the
o
number entered.
Re-enter the new base code to confirm.
o
u
Save the setting.
SET
Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1-
Important basic settings
page 71).
u
Z
, confirm with
x
OK
)
43
Advertisement
Table of Contents
