Total Call Units/Total Call Charges - Gigaset 2011 Operating Instructions Manual

giga2011.bk : kap11.fm5 Seite 58 Freitag, Juli 9, 1999 2:26 PM
9.7.99
Displaying call duration, call units and call charges
Selecting call unit or call charge display
m t Service
000

Total call units/total call charges

Displaying the total call units/total call charges
58
kap11.fm5 Gig 2011 pocket, GBR PTT: A30852-X1101-B657-1-7619
If call unit/call charge display is activated, you can program
whether the number of call units or the corresponding call
charge amount is displayed. Only one option is possible at
a time.
All old single and total entries are deleted when
you enter a new call charge factor.
When operating with more than one handset,
the selection applies to all handsets.
( t means: scroll with
Select the Service menu item.
# 8 2
Start the setting procedure.
d Enter the four-digit base code (factory default: "0000").
Set the call charge factor to "000". Call unit display is se-
SET
lected. Save the setting.
or
d
Enter the call charge factor for each call unit and thereby
SET
select the call charge display; for example, in the case of
a call charge factor of 0.12 DM per call unit, enter
012
You can display the total call units or the corresponding to-
tal call charges at any time. The total displayed (call units
or call charges) depends on whether you selected call unit
display or call charge display.
You can display:
the total for a specific handset, or
l
the total sum for all handsets.
l
The total is displayed for approx. 12 seconds.
Z
, confirm with
OK
.
SET
)