Table of Contents
Advertisement
V、mV
nF、µF
°C、°F
dBm
AC DC
%
41000
○
,11
NO.
Unit
○
,12
○
,13
○
MEM
,14
○
,15
○
,16
○
,17
www.tmatlantic.com
The unit of voltage: Volt, Mill volt
The unit of capacitance: Nanofarad, Microfarad, Millifarad.
Degrees Celsius (default) or Fahrenheit.
For ac volts functions, reading is shown in decibels of power above or below 1 mW
(dBm).
Alternating current, direct current.
Display the duty cycle ratio of signals when measuring frequency.
Bar Graph
The polarity indicator both ends of the bar graph show the polarity of the input; the arrow
right of the bar graph indicates an overload condition.
Range display. Digits display range in use.
Time displays. In addition, it could be used to temperature display as well.
Unit displays.
Table 2-3. Display Unit (cont.)
Elapsed Time Display
Secondary Display, and could be used to show the sequence number of the stored
information.
Unit Display of the secondary display
Readings are being recorded in manual stored mode
Primary Display （3 3/4 digital）
Continuity test function is selected.
>30 V ac and/or dc may be present at the input terminals
Relative measured value
Diodes Test
In Calibration mode
Meaning
- 8 -
Advertisement
Table of Contents
