Table of Contents
Advertisement
1. Remove the test leads and turn the meter OFF
2. Specific steps: take off the protector of the meter and then with a standard blade hand screwdriver, turn each battery door
one-quarter turn counterclockwise, so that the slot is parallel with the screw picture molded into the case.
3. Replace the batteries and reinstall the battery door. Secure the door by turning the screws one-quarter turn clockwise.
4. Reinstall the meter's protector.
Make sure the battery's odes are in accordance with the symbols illustrated in battery pool when
replacing them.
www.tmatlantic.com
Caution
F1
Figure 6-1.Battery and Fuse Replacement
- 25 -
F2
Advertisement
Table of Contents
