Attaching The Seat; Installing Wheels - Burley child trailer Owner's Instruction And Safety Manual

Attaching the Seat

1. Behind seat, fasten buckle sections together on upper and
lower straps and adjust as needed.
2. Before closing trailer, unfasten buckles behind seat.
IMPORTANT
ALWAYS KEEP SEAT ATTACHMENTS FASTENED
WHILE TRAILERING.

Installing Wheels

1. Push rubber button on outside of wheel hub.
2. Fully insert axle into axle receiver and release
button.
PHOTO 2
3. Pull firmly on wheel to check that axle is fully seated.
4. Verify that tires are inflated to pressure marked on tire
side wall.
WARNING
MAKE SURE WHEELS ARE HELD SECURELY, WITH WHEEL AXLE
ASSEMBLY FULLY INSERTED INTO TRAILER RECEIVER. YOU
SHOULD NOT BE ABLE TO ROCK OR SHIFT WHEELS. IMPROPERLY
INSTALLED WHEELS CAN FALL OFF, CAUSING AN ACCIDENT OR
SERIOUS INJURY.
PHOTO 1
PHOTO 1
PHOTO 1
: Back of Cub seat shown
PHOTO 2
B U R L E Y C U B O W N E R ' S I N S T R U C T I O N A N D S A F E T Y M A N U A L
Upper Frame Tube
Upper and Lower Strap Buckles
Button
5