Mounting Lights; Installing Cover; Installing Safety Flag - Burley child trailer Owner's Instruction And Safety Manual

Mounting Lights

NOTE: Clear light is mounted facing foward, on side closest to
traffic. Red light is mounted facing rear, on side closest
to traffic.
1. Remove clips and screws from back of lights.
2. Using screws, fasten brackets and lights together.
3. Mount clear light/bracket diagonally on front of roll bar and
red light/bracket on rear of roll bar, both on side closest to
traffic.
PHOTO 5

Installing Cover

1. At top of trailer frame, fit openings on cover sides around
handle bar receivers. Fasten small buckle sections
together. Adjust as needed.
2. On trailer sides, join buckle sections on rear cover corners
to buckle sections below side windows.
3. On trailer front, slip D-rings on front cover corners over
hooked corners of tow bar mounts.

Installing Safety Flag

Insert flag pole into hole in top of LEFT handle bar
receiver.
PHOTO 7
IMPORTANT
DO NOT USE TRAILER WITHOUT SAFETY FLAG.
PHOTO 6
Front of Trailer
Roll Bar
Clear Light
PHOTO 5
PHOTO 6
PHOTO 7
B U R L E Y C U B O W N E R ' S I N S T R U C T I O N A N D S A F E T Y M A N U A L
Red Light
Opening
Handl e bar Mount
Inserting flag pole in handlebar receiver
Buckle
7