Opening And Closing Your Trailer; Attaching The Seat - Burley Honey Bee Owner's Instruction And Safety Manual

The tow bar mount clamps also function as wheel
Note:
WARNING
guards. They will be referred to as clamps in these
assembly instructions.
TRAILERS CAN TIP OVER, CAUSING DAMAGE TO TRAILER AND
SERIOUS INJURY TO PASSENGERS. AVOID CAUSES OF TIP OVER,
ESPECIALLY:
• CHILDREN LEANING OR BOUNCING
• HITTING POTHOLES, CURBS, OTHER ROAD OBSTRUCTIONS
• TAKING TURNS TOO FAST
• SUDDEN SWERVING
• IMPROPER WHEEL INSTALLATION OR TIRE INFLATION

Opening and Closing Your Trailer

1. Rotate front tube upward and rear tube back until they
meet on plastic saddles.
2. Rotate frame locks and snap onto rear tube.
3. To close trailer, reverse opening process.
To view a video clip of "Opening and Closing Your
Trailer" go to: www.burley.com/support/tutorials.cfm.
WARNING
CHECK THAT THE FRAME LOCKS ARE PROPERLY ENGAGED
BEFORE USING THE TRAILER. FAILURE TO DO SO CAN RESULT IN
SERIOUS INJURY.

Attaching the Seat

Attach hooks on seat sides to D-rings by windows.
IMPORTANT
ALWAYS KEEP SEAT ATTACHMENTS FASTENED
WHILE TRAILERING.
4
B U R L E Y H O N E Y B E E O W N E R ' S I N S T R U C T I O N A N D S A F E T Y M A N U A L
FIGURE 1
FIGURE 2
PHOTO 1
Rear
FIGURE 1
Frame Locks
FIGURE 2
D-ring
Hook
PHOTO 1:
Seat sides
Front
Plastic Saddles