Attaching The Mounting Rails To Your Bicycle Seat - Burley Dash FM Owner's Instruction And Safety Manual

Attaching the Mounting Rails to Your Bicycle Seat

(Dash FM)
A
Remove the Mounting Rails from the Mounting
Block by depressing the front face of the
Mounting Block
A
Mounting Rails out of the Mounting Block
Pull both Mounting Rails from Mounting Block at the
same time for smooth removal.
Flip the Base Plate away from the Bicycle
Seat and remove it from the slots on
the underside of the Bicycle Seat.
8
ASSEMBLY & USE
B
1
and simultaneously pull the
note
3
ENG
Remove the Mounting Knob by lifting the
Locking Ring up away from the Bicycle
Seat , and rotating the Mounting Knob
A
. counter-clockwise until detached
B
Pass the Mounting Rails through the 2 holes
between the legs of the Bicycle Seat.
The orientation of the Mounting Rails should be such
that they are bending downwards.
FRA ESP
B
A
2
4
note
BURLEY.COM
.
B