• Check that unit and cellular phone are connected
• Store a voice tag on your cellular phone beforehand.
• If you activate voice dialing with a cellular phone
connected to this unit, this function may not work in
• Noises such as the engine running may interfere
with sound recognition. In order to improve
recognition, operate under conditions where noise is
• Voice dialing may not work in some situations,
depending on the effectiveness of the cellular
phone's recognition function. For details, see the
• Do not use voice dialing on the cellular phone during
handsfree device connection.
• Speak in the same way as you did when you stored
the voice tag.
• Store a voice tag while seated in the car, via this unit
with "Bluetooth Phone" source selected.
Listening to music from an audio
You can listen to music of an audio device on this
unit if the audio device supports A2DP
(Advanced Audio Distribution Profile) of
Connect this unit and the Bluetooth
audio device (page 25).
" " appears during connection.
Turn down the volume on this unit.
Press (SOURCE) repeatedly until
"Bluetooth Audio" appears.
Operate the audio device to start
Adjust the volume on this unit.
Adjusting the volume level
The volume level is adjustable for any difference
between the unit and the Bluetooth audio device.
1 Start playback of the Bluetooth audio device at
a moderate volume.
2 Set your usual listening volume on the unit.
3 Press the select button.
4 Rotate the control dial to select "Bluetooth
Audio Level," then press the select button.
5 Rotate the control dial to adjust the input level
("+18dB" – "0dB" – "–8dB").
Operating an audio device with this
You can perform the following operations on this
unit if the audio device supports AVRCP (Audio
Video Remote Control Profile) of Bluetooth
technology. (The operation differs depending on
the audio device.)
(SEEK) –/+ (./>) [once
for each track]
and hold (SEEK) –/+ (./
(1) (REP) on this unit*
(2) (SHUF) on this unit*
(3)/(4) (ALBUM –/+)
*1 Depending on the device, it may be necessary to
*2 Press repeatedly until the desired setting appears.
Operations other than the above should be
performed on the audio device.
• Depending on the audio device, its information, such
as title, track number/time, playback status, etc.,
may not be displayed on this unit. The information is
displayed during Bluetooth Audio playback only.
• Even if the source is changed on this unit, playback
of the audio device does not stop.
You can connect a cellular phone that supports A2DP
(Advanced Audio Distribution Profile) as an audio
device and listen to music.
Initializing Bluetooth Settings
You can initialize the all Bluetooth-related
settings from this unit.
The Bluetooth settings menu appears.
Rotate the control dial to select
"Initialize," then press the select
The confirmation appears.
"Initializing..." appears while initializing the
When disposing of this unit, phonebook data should
be deleted with "Initialize."
on this unit
on this unit