Advertisement
Chair foot support
Adjust the position of the passenger's foot
support. To do so:
1. First determine if the foot support is in the
correct location. This is depending on the
length of the passenger's leg. By loosening
the knob, the support can be taken out of the
bracket and attached again one hole further.
2. There is another alternative for adjustment if
it is not possible for these adjustments to find
the correct position. Both bracket plates can
be mounted one hole to the front or one hole
to the back. To do this:
Loosen the screws completely with an Allen
key and move the plates to the desired
position. Tighten the screws again.
3. To adjust the position of the foot support:
Slightly loosen the screw of the foot support
and put the foot support in the desired
position in such a way that the passenger is
sitting most comfortably. Tighten the screw
again.
4. There is another alternative for adjustment if
it is not possible for these adjustments to find
the correct position. The foot support can be
mounted one hole to the front or one hole to
the back. To do this:
Loosen the screws completely with a socket
wrench and move the foot support to the
desired position. Tighten the screws again.
User manual
O-Pair² 06.13
9
Advertisement
