Advertisement
Electric motors
The O Pair can be equipped with an electric Silent motor system or Heinzmann.
Silent Electric motor
The Electric motor has the following Functions:
- Pedal assistance while cycling
- Launch control
- Backwards pedaling with assistance
Press the on/off button to turn on the motor .
After the system is turned on, the electric
motor is active in level 1.
Level 1 provides light support. Level 3
provides optimum support. You can change
the level while cycling.
The engine has launch control. This allows the driver to accelerate without pedaling
up to a speed of 5 km / h . To accelerate, press the launch button and keep it
pressed down . The motor is activated after 2 seconds.
The reverse gear is activated by pedalling back from a standing position. Within a
few seconds the motor is activated and the tricycle cycles at a speed of about 3KM/h
backwards when you start to pedal backwards.
Do not be frightened by an unexpected noise of the electric motor. If you
e.g. wait for the traffic light and you play with the pedals by moving them
backwards the reverse gear is activated and the tricycle cycles
backwards.
With the on/off button, you can turn off the system. When the system is not used, it
will automatically turn off after a certain time.
You can see the battery level at the indication lights at the coloured display. If only
the red light is on, the battery is almost empty and needs to be recharged or
replaced by a new, fully charged battery.
When the last red light flashes, the battery is empty and the engine will not support
you any longer while cycling.
User manual
O-Pair² 06.13
On/of Button
Indication lights battery
Stand 1, 2 or 3
deAkkus
Launch
Con
16
Advertisement
