Advertisement
Waist belt chair
Wrap the belt around the body and buckle it.
Push the red button to unfasten the belt.
Set the belt for the passenger by:
1. Unfastening the belt.
2. Pull the belt until it fits around the body of
the passenger. Then buckle
Accessories
Depending on your order, you can use the accessories as described below.
Head rest
To set the head rest:
1. Slightly loosen the nuts of the head rest
with a socket wrench.
2. Position the head rest. Height, depth and
angle can be adjusted at the same time.
Then fasten the nuts
Adjust the seat depth
To adjust the seat depth of the chair to the
passenger:
1. Slightly loosen both nuts with a spanner.
2. Slide the seat so it fits the legs of the
passenger. Fasten the nuts
User manual
O-Pair² 06.13
it.
again.
again.
2.
1.
2.
1.
2.
1.
1.
10
Advertisement
