Advertisement
7.
Optional: If you have an electric
Heinzmann motor, loosen the cables.
This need not to be done with the Silent
system.
8.
Lift up the handle [A]. Loosen the clamp
[B] and pull back the handle again. Slowly
lower the wheelchair to the front on the
nose-wheel.
9.
Remove the bicycle part from the
coupling. Caution: This is heavy. Hold
the frame firmly with both hands.
10. Place the rear end on the stand.
To assemble the bicycle again, follow these
steps in reverse order.
User manual
O-Pair² 06.13
[B]
10.
7.
[A]
8.
9.
14
Advertisement
