Advertisement
Steering damper
The steering damper affects the stability
during steering. By adjusting the screw,
steering gets more rigid and stability will
increase. Determine your own most
comfortable setting for using the bike.
Backrest chair
Adjust the position of the backrest and the
side support of the passenger.
Start with the height of the backrest and
armrests. To adjust these:
1. Loosen the nut on the upper bracket slightly
by using a socket wrench. Loosen the two
screws of the lower bracket slightly with an
Allan key.
2. Adjust the backrest. The backrest is
adjusted correctly if the passenger can
easily rest with the lower arms on the arm
rests and the upper ones straight down.
Tighten the nut and screws again.
Next, adjust the backrest in the desired
position. To do this:
1. Loosen the nut of the upper bracket slightly
by using a socket wrench.
2. Turn the backrest, so that the passenger is
sitting comfortably. Tighten the nut again.
At last, adjust the side supports. To do this:
3. Loosen the four screws slightly on both
sides using a socket wrench.
4. Turn the side supports to the body, in such
a way that the passenger is sitting most
comfortably. Tighten the screws
User manual
O-Pair² 06.13
1.
1.
again.
1.
2.
2.
4.
3.
8
Advertisement
