Adjusting User Sound Mode; Spatial Effect; Avc (Auto Volume Control) - InFocus TD40 PAL User Manual

User Adjust
You can use the OSD menu to change the Treble, Bass, Balance and DRC according to your preference.
1
Equalizer menu appear when you select User mode.
2 Select a gain bar with VOL+, VOL button on the
remote control and adjust it with PG+ / PG- button.
3
Press BACK or BACK button on the remote control
to exit Equalizer. The result will be saved automatically.

Spatial Effect

This function can create surround effect such as the sound seems to come from all directions.
Press Menu/set button to display the main OSD menu.
1
Select the SOUND main menu item with PG+/PG-
2
button.
3
Press Menu/Set to enter the sub menu.
4 Select Spatial Effect and press VOL+ button.
5
Turn on or off Spatial Effect function with PG+/PG-
button and press Menu/Set button.

AVC (Auto Volume Control)

This function adjust sound volume level automatically depending on the source.
1
Press Menu/set button to display the main OSD menu.
2
Select the SOUND main menu.
3
Press Menu/Set to enter the sub menu.
4
Select AVC and press VOL+ button to enter the
parts. Then the cursor moves into the
5
Turn on or off AVC function with PG+/PG button and
press BACK button.
Setting the Sound
Select User mode (Previous page)
Equalizer
Balance
Sound Mode
Spatial Effect
AVC
MTS
Balance
Sound Mode
Spatial Effect
AVC
parts.
MTS
0.1 0.5 1.5 5.0 10.0kHz
User
OFF
OFF
Stereo
User
OFF
OFF
Stereo
OWNER'S MANUAL
41