Connecting The Set Top Box - InFocus TD40 PAL User Manual

How to connect
Connect Set Top Box video inputs to SCART, COMPONENT, PC or DVI jacks on the Monitor. Audio inputs
to Audio sockets beside the L (White) and R (Red) audio jacks which you connect video inputs.
How to use
1 Turn on the Set Top Box.
Press INPUT button on the remote
2
control of the Monitor and select
Component1, Component2, PC
or DVI.
How to connect
With SCART (Euro cable)
Connect a SCART cable to the SCART jacks of the
STB and the Monitor.
With Component
Connect a three separate component cables to the
component jacks of the STB and the Monitor.
Connect L (White) and R (Red) sound cables (composite)
to the sound jacks of the STB and the Monitor.
With RGB or DVI
Connect a D-Sub or DVI cable to the AV video jacks of
the STB and the Monitor.
Connect L (White) and R (Red) sound cables (composite)
to the sound jacks of the STB and the Monitor.

Connecting the Set Top Box

Supported Signals
Component1
480i/60Hz
480p/60Hz
576i/50Hz
576p/50Hz
720p/50Hz
720p/60Hz
1080i/50Hz
1080i/60Hz
• Component, PC and DVI ports can be displayed
only 1 signal among them. If one of them is
bong displayed, other sockets are unavailable.
Component2 PC DVI
OWNER'S MANUAL
21