Basic Operation - InFocus TD40 PAL User Manual

Basic Operation

Turning the Monitor On And Off
Press the Power button on the remote control. The the Monitorwill turn on and you will be ready to use its
features. You can also use the Power key on the front panel.
Select Source
Press INPUT button on the remote control. Then you can see the source list menu shown as below.
Source Change
1 TV
2 SCART 1
3 SCART 2
4 S-VIDEO /AV
5 COMPONENT 1
6 COMPONENT 2
7 PC
8 DVI
Source list menu
TV program Selection
Connect the signal source (TV antenna) to TV input. Press INPUT button on the remote control
1
and select TV on the source list.
2 Use PG+, PG- button or numeric button to change TV program you want.
3 Press Pre PG button on the remote control to watch the previous program.
Also, you can tune the cable service, provided programs while using the cable box.
4
For further information regarding cable TV service, contact your TV service provider(s).
Volume Control
Use VOL+ / VOL- button on the remote control to adjust the volume level.
Press MUTE button on the remote control when you need to cut the sound temporarily.
24
OWNER'S MANUAL
Select the source to watch with PG+ / PG- button on
the remote control and press the Menu / Set button.