Connecting The Pc[D-Sub & Dvi] - InFocus TD40 PAL User Manual

Connecting the PC[D-Sub & DVI]
Connecting a PC to the Monitor
Connect a PC (15pin) video cable between the
Video Output port on the PC and the PC port
on the Monitor.
Pin Configuration
15Pin Signal Cable (based on protruded pin)
Pin Configuration
Turn on the Monitor and press INPUT button
1
to select the PC MODE.
Turn on the PC and check for the PC
2
require ment.
Adjust the PC screen in Geometry menu.
3
(See 43 page.)
22
OWNER'S MANUAL
Pin No. Description
Red (R)
1
2 Green (G)
3 Blue (B)
Grounding
4
Grounding (DDC)
5
Red (R) Grounding
6
7 Green (G) Grounding
8
Blue (B) Grounding
9
Reserved
Sync Grounding
10
11 Grounding
12
Data (DDC)
13 Horizontal sync.
14
Vertical sync.
Clock (DDC)
15