Disassembly
Removing and Replacing the Keypad
26
1.
Remove the battery cover, battery, memory card, rear housing, and transceiver
PC board, as described in the procedures.
2.
Using plastic tweezers, gently lift up the keypad and remove it from the front
housing as shown in Figure 14.
Figure 14. Removing and Replacing the Keypad
3.
Use the plastic tweezers to remove the speaker gasket from the front housing
(see Figure 15).
Figure 15. Removing and Replacing the Speaker Gasket
March 09, 2007
Plastic tweezers
Keypad
Plastic tweezers
Front housing
Speaker gasket
MOTOKRZR K1m
061155o
061156o
6809504A60-A