Level 1 and 2 Service Manual
G
6809504A60-A
Ensure that the chassis is inserted in the groove of the flip inner housing as shown
below.
Figure 25. Flip Chassis Installation Detail
10. Insert and tighten the 4 flip assembly screws with the T-5 driver. Tighten to
final torque setting of 14 Ncm (1.3 inch lbs.) (see Figure 26).
Screws
Figure 26. Insert Flip Chassis Screws
March 09, 2007
Disassembly
070393o
Screws
070394o
33