Removing And Replacing The Keypad - Motorola C200 Service Manual

Level 1 and 2 Service Manual

Removing and Replacing the Keypad

6809464A58
1. Remove the battery, SIM, rear housing, and transceiver board, as described in
the procedures
Front Housing
Figure 12. Removing the Keypad
2. Lift the keypad from the front housing as shown in Figure 12.
3. To replace, insert the keypad into the front housing. Ensure the keys align
properly with the openings and the keypad is fully seated in the front housing.
➧
Ensure the keypad is correctly positioned in the front housing relative to the
transceiver board. Verify operation of the keys after replacing the transceiver board.
4. Replace the transceiver board, rear housing, SIM, and battery as described in
the procedures.
5. Verify correct operation.
.
Plastic Tweezers
Keypad
May 21, 2003
Disassembly
031329o
25