Removing And Replacing The Keypad - Motorola C25 Service Manual

Disassembly

Removing and Replacing the Keypad

28
1. Remove the battery, SIM, rear housing, and transceiver board, as described in
.
the procedures
DISASSEMBLY TOOL
Figure 16. Removing the keypad
2. Lift the keypad from the front housing as shown in Figure 16.
3. To replace, insert the keypad into the front housing. Ensure the keys align
properly with the openings and the keypad is fully seated in the front housing.
4. Replace the transceiver board, rear housing, SIM, and battery as described in
the procedures.
5. Verify correct operation.
August 01, 2001
Product Family C25 and C43
KEYPAD
FRONT HOUSING
T191_keypad_rem.eps
6881039B15