Back Panel - Avermedia AVerDiGi MOB1304 NET User Manual

1.3

Back Panel

Name
(1) Power cable
(2) CH1
(3) CH2
(4) CH3
(5) CH4
(6) Video Out (BNC)
(7) VGA Out
(8) Audio In(4CH)
(9) Audio Out(1CH)
(10) Sensor In
(11) Alarm Out
(12) RS485
Function
Connecting the power cord. The power cord divide into 4 lines and each line has
sticker on it for function description.
 GND (Black): Power connecting negative(-)and camera negative(-)
 12V~24V(Red): Power connecting positive(+)
 ACC(Green): Connect with the ACC line of vehicle
 12V Out(Yellow): Camera connecting positive(+)
Input the video camera signal and display it on channel 1
Input the video camera signal and display it on channel 2
Input the video camera signal and display it on channel 3
Input the video camera signal and display it on channel 4
Output the video signal to a TV(Call Monitor)
The DVR unit supports dual video output – Video Out and VGA Out.
Output the video signal to a LCD monitor
Input the audio signal from a microphone or audio input device.
i
Microphone with its own power supply is necessary and the internal
amplification must be used.
Output the audio signal to a speaker
i
The audio out device with its own power supply is necessary.
Support 4 sensor device
Support 1 relay device (Relay: 1A @ 125V AC/30V DC)
For PTZ camera connection
3