Hdd Led; Nic1 Led; Nic2 Led; Overheat Led (Oh) - Supero SUPERSERVER 7043M-8 User Manual

HDD LED

The HDD LED (for IDE Hard Disk
Drives) connection is located on
pins 13 and 14 of JF2. Attach the
IDE hard drive LED cable to these
pins to display disk activity. Refer
to the table on the right for pin
definitions.

NIC1 LED

The NIC1 (Network Interface Con-
troller) LED connection is located
on pins 11 and 12 of JF2. Attach
the NIC1 LED cable to display net-
work activity. Refer to the table
on the right for pin definitions.

NIC2 LED

The NIC2 (Network Interface Con-
troller) LED connection is located
on pins 9 and 10 of JF2.
the NIC2 LED cable to display net-
work activity. Refer to the table
on the right for pin definitions.

Overheat LED (OH)

Connect an LED to the OH connec-
tion on pins 7 and 8 of JF2 to pro-
vide advanced warning of chassis
overheating. Refer to the table on
the right for pin definitions.
Power Fail Button
The Power Fail Button connection
is located on pins 5 and 6 of JF2.
Refer to the table on the right for
pin definitions.
Chapter 5: Advanced Motherboard Setup
Attach
5-13
H DD LED Pin
Definitions
(JF2)
Pin
Number Definition
13 Vcc
14 HD Active
N IC1 LED Pin
Definitions
(JF2)
Pin
Number Definition
11 Vcc
12 GN D
N IC2 LED Pin
Definitions
(JF2)
Pin
Number Definition
9 Vcc
10 GN D
Overheat (OH) LED
Pin Definitions
(JF2)
Pin
Number Definition
7 Vcc
8 GN D
Pow er Fail Button
Pin Definitions
(JF2)
Pin
Number Definition
5 Vcc
6 GN D